|
| |
|
|
|
| Z00M 55900000CF-The ADSL X6 integrates an ADSL
2/2+ modem, an 802.11g wireless access point, a router, NAT and SPI firewalls, and a
four-port 10/100 Ethernet switch into a single cost-effective product. The wireless access
point and Ethernet ports can be used to attach wireless clients, a switch, a hub, or any
combination of those devices and provide high speed ADSL Internet access for up to 253
computers. The 5590-00-00CF has a very easy to set up Quality of Service (QoS) feature
that prioritizes traffic based upon the physical port, either Ethernet or wireless, that a
prioritized device uses to connect to the X6. This allows a gaming device, VoIP telephone
adapter, or other device to receive prioritized upstream bandwidth without the confusing
networking terminology usually required with QoS. The ADSL modem works with any standard
ADSL service: G.DMT, G.Lite, ANSI T1.413 Issue 2, ADSL2 (G.992.3), ADSL2+ (G.992.5) . An
auto configuration wizard can be used to establish the VPI/VCI settings and encapsulation
used on an ADSL-enable phone line, making this device easy to set up with any ADSL service
provider. Other advanced features supported include: WPA2, WPA, and WEP wireless security;
WME (WiFi Multimedia Extensions) for Quality of Service with wireless networks; WDS
(Wireless Distribution System) for support of wireless repeater functions; Per Port PVC,
for routing of a particular PVC to a specific Ethernet port on the switch when delivering
video. This device is RoHS (Restrictions on Hazardous Substances) compliant |
| We diligently strive to provide as accurate information as
possible. However, as manufacturers provide a large proportion of this information, we
make no warranty expressed or implied with respect to accuracy of the information,
including price, product descriptions or product specifications. Both the product and
manufacturer names are used only for the purpose of identification. 
Copyright© 2008 JMAC ELECTRONICS
|
| |
|
