MODEL- BL-WV10A          VENDOR- PANASONIC CONSUMER
    
FEATURES- BLWV10A-Panasonic-TV Adapter for Network Cameras
       Just connect the video cable to a TV to watch the camera images and 
        control up to 8 cameras. You can set up the network cameras where 
        you want, and even access cameras from across the internet.
* Change the Camera Direction by Remote Control! 
   You can move the camera lens in the direction you want to see by 
   pressing the cursor key on the remote control or even access your 
   favorite angles by using the preset controls (numbers 1-8). This simple 
   remote control lets you operate the camera right from the TV, without 
   having to move the camera by hand. 
* Human Detection Sensor 
   The built-in sensor can detect the presence of people and large animals, 
   which can trigger the camera to record images or send an email of the 
   captured image(s) to your computer or cell phone. 
* Warning Buzzer Informs You When Activity is Detected 
   Each camera can utilize either a built-in sensor (BL-C10A/BL-C30A) or a 
   commercially available external sensor to detect activity. When the 
   sensor is triggered, a buzzer sound notifies anyone who is near the TV 
   adaptor. 
* Easily Record Camera Images
   By inserting an SD Memory Card into the unit, the camera images can be 
   recorded onto the card. The recorded images can then be displayed on the 
   TV by remote control operation.
    
  -- SPECIFICATIONs -------------------------------------
INTERFACE    - LAN: Ethernet (10Base-T/100Base-TX) x 4 ports
               Video output terminal (composite NTSC)
               SD Card Slot 
PROTOCOLS    - Supports IPv4
                  "     TCP, UDP, HTTP, FTP, DHCP 
RESOLUTIN    - 320 x 240, 640 x 480       
IMAGE QUALITY- 3 settings (favor clarity, standard, favor motion)
IMAGE ENCODING SYSTEM-
               JPEG, Motion JPEG
FRAME RATE   - Max. 15 frames/sec (320 x 240)       
SECURITY     - User ID and password required for monitoring
CONNECTIONS  - Up to 8 cameras can be connected and displayed
               Displays output in single-screen 8-page mode, or 4-screen, 
                 2-page mode.
REMOTE CONTROL OPERATION-
               All connected cameras can be remote-controlled       
CAMERA VIEW MODES-
               Sequential switching
               Sensor-activated switching (BL-C10 and Bl-C30 only)
               Manual switching 
NETWORK SETTINGS-
               On-screen setting
               Setting items: IP address, subnet address, gateway, DNS 
                                server 1, DNS server 2.
SD CARD FUNCTIONS-
               Still and moving image recording and playback
               Setting for sensor-activated and timer recording 
WIRELESS TECHNOLOGY-
               IEEE 802.11g and IEEE 802.11b 
FREQUENCY BANDWIDTH-
               2412 to 2484 MHz 
CHANNEL OFDM - Yes (Orthogonal Frequency Division Multiplexing system) 
TRANSMISSION SYSTEM-
               IEEE 802.11g: 54 Mbps, 48 Mbps, 36 Mbps, 24 Mbps, 18 Mbps, 
                             12 Mbps, 9 Mbps, 6 Mbps
               IEEE 802.11b: 11 Mbps, 5.5 Mbps, 2 Mbps, 1 Mbps 
REPEATER     - Yes
ACCESS POINT - Yes
WIRELESS SECURITY-
               WEP (64/128/152 bits)
               ESSID ANY access denial (setting required)
               ESSID non-transmission within beacon (setting required)
               No-response function for probe request (setting required) 
POWER SOURCE - AC Adaptor      : 12V DC
               Supplied Voltage: 12V