|
| |
 |
|
|
| The D-Link
DGE530T-D-GigaExpress 10/100/1000Mbps PCI Network Adapter is a 32-Bit PCI 10/100/1000Mbps
Managed Gigabit LAN Adapter. MODEL- DGE-530T VENDOR- D-LINK FEATURES- GigaExpress
10/100/1000Mbps PCI Network Adapter Single port 32-bit/33MHz 10/100/1000 Mbps PCI Adapter.
The DGE-530T is a 10/100/1000Mbps copper Gigabit PCI card for servers and workstations.
Current systems running at 10Mbps and 100Mbps can be upgraded to Gigabit Ethernet,
eliminating network bottlenecks, and increasing productivity. Integrate Gigabit now and
you can save time, money, and downtime because the DGE-530T will automatically detect and
run at higher speeds when it becomes available. Includes PCI card with standard and low
profile brackets. * Cost-Effective, Scalable Migration As an inexpensive alternative
solution to fiber-optic, the card allows you to instantly upgrade to Gigabit without
requiring you to install new, expensive fiber cables. Gigabit Ethernet uses your existing
Category-5 cabling while providing you with 10/100/1000Mbps network speed auto-sensing and
full/half duplex auto-negotiation. * Advanced Features and Security The DGE-530T supports
SNMP for remote troubleshooting and management, ACPI for lower power consumption, and WoL
for remote wake. This helps to lower total cost of ownership (TCO). The card also features
on-board screening of VLAN Tagged Ethernet frames, allowing you to assign multiple subnets
to each server and isolate devices within each VLAN from the rest of the network for
better traffic control and security. It also supports 802.1p Priority Tagging to allow you
to prioritize traffic. The card also features embedded flow control and independent FIFO,
providing a means to protect against possible data loss during transmission on the
network. With the Cable Diagnostic feature, the card will automatically detect whether you
have a bad cable, making your troubleshooting task easier. -- SPECIFICATIONs
---------------------------------- STANDARDs - IEEE 802.3 Ethernet, 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet IEEE 802.1p Priority Tagging, 802.1q VLANs IEEE 802.3x Flow
Control INTERFACE/BUS- 32-bit Local BUS Master 2.1/2.2 Universal Bus Support (3.3V and
5.0V) CONNECTORs - (1) 10BaseT/100BaseTX/1000BaseT/RJ 45 port QoS - Support For 802.1p
Priority Tagging VLANs - Support For 802.1q VLANs CABLE DIAGNOSTICS - Advanced Cable
Diagnostics (Windows Utility) POWER MANAGEMENT - Wake-On-LAN (WoL) and ACPI 2.0 NETWORK
MANAGEMENT- SNMPv1 & Integrated Cable Diagnostics O/S SUPPORT - Windows
98SE/ME/2000/XP Novell Netware 4.2/5.x/6.x Red Hat Linux 7.3 & Later (Kernel 2.4.18-3
and later) (Planned Future Support For Free BSD and Sun Solaris) APPROVALS - CE MarkB,
BCCI-B, BSMI, C-Tick, & FCC Class B POWER- +5 volts +/- 5% SIZE - 4.88" x
2.01" WT.- 0.51 lbs. |
| We diligently strive to provide as accurate information as
possible. However, as manufacturers provide a large proportion of this information, we
make no warranty expressed or implied with respect to accuracy of the information,
including price, product descriptions or product specifications. Both the product and
manufacturer names are used only for the purpose of identification.
Copyright© 2008 JMAC ELECTRONICS
|
| |
|
