MODEL- DWL-2700AP         VENDOR- D-LINK
    
FEATURES- DWL2700AP-DLINK - AirPremier Outdoor 2.4GHz Wireless Access Point/Bridge
       The D-Link AirPremier DWL-2700AP is a 2.4GHz Outdoor Wireless Access 
        Point that conforms to IEEE 802.11b/g standards. The DWL-2700AP 
        covers a large operating distance for Wireless LANs and broadband 
        Internet access with transfer speeds of up to 54Mbps. The 
        DWL-2700AP is ideal for Internet Service Providers to create 
        hotspot networks and provide outdoor users with wireless Internet 
        access. Ideal locations include manufacturing plants, industrial 
        locations, college and high school campuses, airports, golf 
        courses, marinas and many other outdoor venues.
       The AirPremier DWL-2700AP is designed to handle any outdoor 
        environment. With die-cast watertight housing and built-in heater 
        with a temperature sensor, the DWL-2700AP is the most robust 
        outdoor AP for enterprise networks. It includes cost-effective IEEE 
        802.3af Power over Ethernet (PoE) for easy installation. The 
        DWL-2700AP features WDS (Wireless Distribution System) which can be 
        configured to perform in any one of five modes -- wireless Access 
        Point (AP), Point-to- Point (PtP) bridge, Point-to-Multi-Point 
        (PtMP) bridge, repeater, or wireless client. It also includes an 
        embedded DHCP server automatically assigns IP addresses to wireless 
        clients. With a variety of high-gain outdoor antennas from D-Link 
        to accommodate your network needs, the DWL-2700AP is ideal for 
        connecting networks in different buildings.
       The DWL-2700AP supports up to 152-bit WEP encryption and AES 
        (Advanced Encryption Standard). In addition, IEEE 802.1X port-based 
        network access control for user authentication with WPA (Wi-Fi 
        Protected Access) helps provide optimal security. Load balancing 
        and redundancy are also available. The DWL-2700AP is easy to manage 
        with its web-based user interface and Telnet configuration. For 
        Enterprise networks, the DWL-2700AP supports SNMP v.3 network 
        administration and real-time network traffic monitoring via 
        D-Link s D-View Network Management software.
     
  -- SPECIFICATIONs -----------------------------------
STANDARDS        - IEEE 802.11b, IEEE 802.11g
FREQUENCY RANGE  - 2.4 ~ 2.497MHz ISM band
TRANSMIT POWER   - 23dBm (200mW)
SECURITY         - 64/128/152-bit WEP (RC4) 
                   IEEE 802.1x port-based authentication 
                   MAC address based access control 
                   802.11b SSID hidden 
                   WPA (Wi-Fi Protected Access) 
                   AES (Advanced Encryption Standard)
DEVICE MANAGMENT - Web-based manager 
                   Telnet 
                   SNMP v.3
INTERFACE        - Power Jack 
                   Factory Reset Button 
                   10/100M Base-T (UTP) 
WIRELESS ANTENNA - Antenna Type Monopole antenna with 5dBi gain
ETHERNET STANDARD- IEEE 802.3 
                   IEEE 802.3u 
                   IEEE 802.3x
INDICATORs       - LEDs for Power, RSSI level, 10/100M, 802.11b/g
MEDIA ACCESS PROTOCOL-
                   CSMA/CA with ACK
RADIO AND MODULATION TYPE-
                   BPSK, QPSK, 16QAM, 64QAM, OFDM 
                   DQPSK, DBPSK, and CCK
OPERATING FREQUENCY  -
                   2400 ~ 2483.5MHz ISM band 
                   Channel Numbers 
                   11 Channels for United States 
                   13 Channels for Europe Countries 
                   13 Channels for Japan
DATA RATE        - 54, 48, 36, 24, 18, 12, 9 and 6Mbps 
                   11, 5.5, 2, and 1Mbps
TRANSMITTER OUTPUT POWER-
                   Typical RF Output Power at each Data Rate 
                                       +18dBm at 54Mbps 
                                       +20dBm at 48Mbps 
                                       +20dBm at 36Mbps 
                                       +23dBm at 24, 18, 12, 9, and 6Mbps 
                                        +23dBm at 11, 5.5, 2 and 1Mbps 
RECEIVER SENSITIVITY-
                   Typical Sensitivity at Which Frame 
                    (1000-byte PDUs) Error Rate = 10% 
                    - 89dBm at 2Mbps 
                    - 87dBm at 6Mbps 
                    - 86dBm at 9Mbps 
                    - 85dBm at 12Mbps 
                    - 83dBm at 18Mbps 
                    - 83dBm at 11Mbps 
                    - 80dBm at 24Mbps 
                    - 76dBm at 36Mbps 
                    - 71dBm at 48Mbps 
                    - 66dBm at 54Mbps
APPROVALS - FCC Part15 
            ETSI 300/328
POWER- 48VDC +/- 10% for POE
       Consumption Max. 7W without POE (without heater) 
                   Max. 8.5W with POE(without heater) 
                   Max. 27W without POE (with heater) 
                   Max. 28.5W with POE(with heater)
SIZE - 6.1"w x 1.77"h x 10.93"d