MODEL- DWL-P50 VENDOR- D-LINK
FEATURES- DWLP50-DLINK - Express EtherNetwork Power Over Ethernet (POE) Adapter
By using the DWL-P50, both data and electrical power can be
delivered to a non-PoE Ethernet-enabled device from a single CAT5
Ethernet cable.
The DWL-P50 is simple to install and requires no tools or software.
Multiple DWL-P50 terminal units complement any PoE injector unit or
midspan switch to provide small to medium business settings a
complete end-to-end PoE solution. In addition, this unit supports
802.3af ensuring compatibility with other 802.3af PoE compliant
injector units or midspan switches.
Its compact size makes implementation extremely easy. During setup,
this terminal unit can be set to power up any compatible 5V or 12V
Ethernet-enabled device via the volt selector located on the back.
Using the convenience of Power over Ethernet, you eliminate the need
to place an Ethernet-enabled device, such as a wireless access
point or an Internet camera near a power outlet. Having to manage
only an Ethernet cable simplifi es the physical installation of the
device. You can now mount these devices on a ceiling or outside, up
to 328 feet (100m) from a power source.
With PoE, both power and data can be transmitted using standard
Ethernet cabling with virtually no reduction in data throughput.
Use the DWL-P50 with Ethernet-enabled devices where power outlets
are not readily available and with any compatible PoE power source.
-- SPECIFICATIONs -----------------------------------
STANDARDS - 802.3af
CAT5 ETHERNET PIN USAGE-
Data : 1, 2, 3, 6
Power: 4, 5, 7, 8
INDICATORS - LED for Power
VOLTAGE - Input : 48V DC, 400mA over CAT5/e or CAT6
Output: 5V DC, 2.5A or 12V DC, 1A
APPROVALS - FCC B, CE, C-TICK, UL
SIZE - 2.05"w x 1.1"h x 3.19"d WT.- 0.18 lbs.





Copyright© 2008 JMAC ELECTRONICS
 |