MODEL- MIL-RC3113US        VENDOR- MILAN TECHNOLOGY
 
FEATURES- Milan -MILRC3113US Raven Series Standalone Media Converter
       10/100BaseTX to 100BaseFX SC MMF 2km.
       The Raven Series of Converters offers connectivity solutions for a 
        broad range of environments. Whether connecting two remote 
        locations, or solving a difficult wiring closet issue, the Raven 
        Series has a product to meet your needs. The standalone converters 
        are ideal for remote locations requiring a single, cost effective 
        fiber link. These converters may be consolidated into a 19 inch 
        rack system, allowing for utilization of a common product in the 
        main or intermediate distribution frame and at the remote location. 
       For those needing visibility into how their network is operating, a 
        managed media conversion system is available.
* The Raven Series is designed with ease of use in mind. The UTP port will 
  auto-detect the cabling type (cross over or straight through), the 
  polarity of the pins, the speed of the port and the mode of the port 
  without any user intervention. No more concerns about what type of device 
  the converter is connecting, whether hub or server. The broad range of 
  media for the fiber port makes for optimal flexibility in designing the 
  network, and upgrading the network in the future.
* This product has been designed with diagnostic functions as well. The 
  LinkSentry feature allows for passing through physical layer failures 
  from one media to the other. This allows for a higher reliability in your 
  network by making all components aware of network failures as they occur. 
  The managed system takes this further by sending traps when link failures 
  are seen on the ports.
* The ease of use, flexibility in network design, Advanced diagnostic 
  capabilities and management features make the Raven series of converters 
  the optimal conversion product for your network. 
 
  -- SPECIFICATIONs ------------------------------------
CONNECTORS - (1) 10BaseT/100BaseTX/RJ45 port
             (1) 100BaseFX/SC port 
PERFORMANCE- 
  MAC Address Table          : 1024 addresses
  Forwarding & Filtering Rate: 148,880pps for 100Mbps
                                14,880pps for  10Mbps
  Latency                    : 14.3 microsec (64 byte packet, 100Mbps full 
                                duplex).
FIBER PORT CHARACTERISTICS-
  Speed       : 100BaseFX Multimode (2km)
  Transmitter : Wavelength 850nm
  Output Power: -19 dBm (50 or 62.5/125um)
  Receiver    : Wavelength 1310nm
  Sensitivity : -31 dBm
ENVIRONMENTAL - Operating Temperature   : 32 ~ 122 degrees F
                Storage Temperature     : -13 ~ +158 degrees F
                Humidity (non condensing): 10% ~ 95%
APPROVALS     - UL, TUV, FCC A, CSA A, CE, EN55022, EN55024
POWER- 100 VAC @ 60Hz, 5VDC, 1A; Consumption 14 watts max.
SIZE - 3.31"w x 1.0"h x 4.75"d                 WT.- 0.75 lbs.