MODEL- SMART1000RM2U VENDOR- TRIPPLITE
FEATURES- SMART1500RM2U-Tripp-Lite - SmartPro Rack/Tower UPS System- Black finish
Intelligent, line-interactive network power management system.
1500VA line interactive 2U rack/tower UPS system with sine wave
output in AC and battery mode; 8 outlets arranged in 2 switchable
load banks; Simultaneous communications via SNMPWEBCARD slot, USB
and DB9 serial ports; Included PowerAlert UPS monitoring software
manages an unlimited number of network UPS systems; Corrects
brownouts and overvoltages from 83 to 147V; $250,000 Ultimate
Lifetime Insurance (USA & Canada only).
Tripp Lite's SMART1500RM2U intelligent, line-interactive sine wave
rack/tower uninterruptible power supply prevents data loss,
downtime and equipment damage due to power outages, voltage
fluctuations and transient surges. Requires only two rack spaces
(2U) in a standard rack enclosure. Large internal batteries offer
25 minutes half load runtime and 10 minutes at full load. Maintains
regulated 120V nominal output without using battery power during
brownouts and overvoltages from 83 to 147V.
1500VA/1000 watt power handling capability and full time sine wave
output supports networking, telecom and other sensitive electronic
applications. Includes a total of 8 outlets arranged in 2 load
banks that are individually controllable by a software interface to
reboot select equipment on demand or automatically shed less
significant loads to extend battery runtime for more critical
equipment.
Supports simultaneous remote monitoring of UPS and site power
conditions via built-in USB and DB9 monitoring ports. Optional
SNMPWEBCARD accessory enables remote monitoring of UPS as a managed
device via network management console applications. Communications
ports support messaging of detailed UPS operational parameters and
line power status. Includes PowerAlert UPS monitoring and
unattended shutdown software with management support for an
unlimited number of network UPS systems. Free PowerAlert enterprise
management software is also available for select opportunities.
Built-in accessory slot supports SNMP with optional SNMPWEBCARD
adapter. Emergency Power Off (EPO) interface offers option for
instantaneous power-off of UPS and connected equipment in the case
of fire or emergency. Multi-function audible alarms and set of 5
front panel LEDs offer at-a-glance notification of UPS and line
power status. Network-grade AC surge suppression protects equipment
from damage and performance problems resulting from transient
surges and line noise. Attractive all-black color scheme.
DSL connections.
Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
Includes SMART1500RM2U UPS System, Mounting hardware for 4 post
rackmount installation, Cabling for USB & DB9 monitoring and EPO
switching, PowerAlert unattended shutdown and UPS/Power monitoring
software, Warranty information and instruction manual.
* SMART1500RM2U line interactive UPS offers battery derived sine wave AC
output during power outages, voltage regulation during brownouts and
overvoltages, plus network grade AC surge suppression.
* 1500VA/1000 watt power handling capability with full-time sine wave
output offers guaranteed compatibility with networking, telecom and other
sensitive electronic devices.
* Supports 2U rackmount installation in 4 post rack enclosures with
included mounting accessories, 2 post rackmount mountable with optional
2POSTRMKIT accessory, upright tower installation supported with optional
2-9USTAND accessory.
* Large internal batteries offer runtimes of 25 minutes at half load
(750VA/500 watts) and 10 minutes at full load (1500VA/1000 watts).
* Maintains regulated 120V nominal output during brownouts and overvoltages
from 83 to 147V.
* Includes 8 UPS-supported outlets arranged in 2 individually controllable
load banks (2 outlets per bank) that can be powered off and back on again
via software interface.
* PowerAlert UPS monitoring and unattended shutdown software enables
configurable network broadcast messaging, pager & email notification,
event logging and running user-defined script commands.
* Offers simultaneous monitoring by up to 3 directly-connected devices
through included USB, DB9 and SNMP* interfaces (*requires optional
SNMPWEBCARD), or the monitoring of any number of additional UPS systems
over IP with included PowerAlert monitoring software. Free PowerAlert
enterprise management software is also available for select opportunies.
* Communications ports support messaging of UPS and line power status,
including on-battery, low-battery, power restored, AC line voltage, DC
battery voltage and remaining battery capacity.
* Supports timed inverter shutoff after unattended shutdown, activate self-
test and UPS output power control for scheduled or immediate reboot of
connected devices.
* Supports Tripp Lite's WatchDog software application to restore
unresponsive programs by systematically restarting applications,
operating systems and ultimately rebooting completely locked computers by
momentarily switching UPS power off and back on again (requires optional
WATCHDOGSW).
* Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter.
* Emergency Power Off (EPO) interface with cable.
* Multi-function audible alarms and set of 5 front panel LEDs.
* Network-grade AC surge suppression.
* Attractive all-black color scheme.
* UPS battery set ships fully assembled and ready for installation, no time
consuming connection of internal batteries by user is necessary.
* Two year warranty with $250,000 connected equipment insurance (USA &
Canada only).
-- SPECIFICATIONs --------------------------------
OUTPUT- Output volt amp capacity (VA): 1500
Output watt capacity (watts): 1000
Output nominal voltage: 120V AC sine wave output in AC and
battery mode.
Output voltage regulation: LINE MODE, Sine wave line voltage
120V (-21% +8%); BATTERY MODE, Sine
wave output within 5% of 120VAC.
Output frequency regulation: LINE MODE, Passes line frequency of
60Hz +/-10%; BATTERY MODE, Inverter
output regulated to 60Hz +/-0.5Hz.
Outlet quantity/type: (8) NEMA 5-15R output receptacles
Custom load management receptacles: Includes 2 load banks, each with 2
outlets, that support automated
load shedding and remote reboot on
demand of locked network devices.
Configurable via PowerAlert software
to automatically switch off
optional loads, like monitors, to
increase available runtime for
servers and other critical devices.
Overload protection: 15A input breaker
INPUT - Maximum input amps/watts: 10.4A/1110 watts
Input connection type: NEMA 5-15P
Input cord length: 10 ft., 14 gauge
Recommended electrical service: 15A 120V
BATTERY- Full load runtime: 10 minutes (1000VA)
Half load runtime: 25 minutes ( 500VA)
DC system voltage: 24 VDC
Typical battery lifespan: 3~6 years, depending on usage
Battery recharge rate: 2~4 hours to 90%
Battery Access: Hot-swappable batteries are accessible via
battery door.
VOLTAGE REGULATION-
Voltage regulation : Line interactive voltage regulation corrects input
voltages between 83 and 147 back to usable 120V
nominal levels.
Overvoltage correction: Input voltages between 128 adn 147 are reduced by
12%.
Brownout correction : Input voltages between 83 and 105 are boosted by
14%.
LEDS ALARMS & SWITCHES-
Front panel LEDs: 5 front panel LEDs - Green POWER LED, 3 color BATTERY
CHARGE LED, 3 color OUTPUT LOAD LEVEL LED, red BATTERY
WARNING LED.
Alarms: 3 function audible alarm indicate: power failure
conditions- 4 short beeps every 10 seconds; overload -
continuous short beeps; and low battery - continuous
tone.
Switches: Includes 2 front panel mounted push-button switches for
system enable, self-test and alarm cancel functions.
SURGE/NOISE SUPPRESSION-
AC surge suppression : 1800 joules
AC suppression response time: Instantaneous
EMI/RFI AC noise suppression: Yes
COMMUNICATIONs -
Network monitoring port: Includes 2 built-in monitoring ports, 1 USB &
1-DB9. Each supports on battery, low battery,
power restored, AC line voltage, DC battery
voltage, load percentage, battery charge
current, battery capacity, internal UPS
temperature and line frequency status
messaging. Interface supports timed inverter
shutoff after unattended shutdown, activate
self-test and 10 second reboot of connected
equipment. Supports reboot of all connected
devices at once or individual load banks via
software interface. Compatible with Tripp
Lite's PowerAlert and WatchDog software.
Software and cabling: Includes USB cable and PowerAlert Software
SNMP compatibility: Built-in accessory slot accommodates internal
SNMP/Web card and other network accessories.
WatchDog compatibility: Yes, compatible with Tripp Lite's WatchDog
system service to restore operation to locked
equipment through soft reboot of application/
OS or hard power off/on reboot of connected
equipment - ideal for unattended kiosk
applications.
LINE/BATTERY TRANSFER -
Transfer time from line power to battery mode: 2-4 milliseconds
Low voltage transfer to battery power: 83V (resets to line power
as line voltage increases
to 87V or higher).
High voltage transfer to battery power: 147V (resets to line power
as line voltage decreases
to 143V or lower).
EPO PORT - Includes RJ11 EPO (emergency power off) port and cable.
TVSS GROUND- Includes back panel grounding point with thumbscrew for data
line surge suppressors and other network accessories
requiring a safe grounding point.
COLD START - Yes, inverter can be "cold started" to enable temporary AC
output during a power failure.
MATERIAL - Steel construction
FORM FACTOR- Supports 2U rackmount installation in 4 post rack enclosures.
2 post rackmount installation supported with optional
2POSTRMKIT. Upright tower installation supported.
COOLING - Built-in cooling fan
APPROVALS - UL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM
(Mexico).
SIZE- 17.5"w x 3.5"h x 13.5"d WT.- 46.0 lbs.
|
