MODEL- SMART3000RM2U VENDOR- TRIPPLITE
FEATURES- SMART3000RM2U-Tripp-Lite - SmartPro 2U Rack/Tower
SmartPro line interactive 2U expandable rack/tower UPS with
integrated switched PDU.
3000VA line interactive UPS for server, network and
telecommunications equipment/2U rackmount form factor/Corrects
brownouts and overvoltages from 79 to 147, Sine wave output,
Uninterruptible Power Supply (UPS) maintains battery derived AC
output during blackouts and severe voltage fluctuations.
Expandable runtime with optional external battery packs/9 output
receptacles/NEMA 5-20P input plug, NEMA L5-30P replacement plug
included/Network-grade AC surge and noise suppression/Network
management interfaces include 2 USB ports, 2 DB9 serial ports and
SNMPWEBCARD slot.
Supports simultaneous detailed monitoring of equipment load levels,
self-test data and mains power conditions via all 5 network
interfaces at once. Includes PowerAlert monitoring software and
complete cabling/Emergency Power Off (EPO) interface/Integrated 3
bank switched PDU/3 stage metered current monitoring and battery
charge LEDs/Mains power and voltage regulation LEDs/Audible alarm/
Self-test/4 post rack mounting accessories/2-9USTAND and 2POSTRMKIT
accessories available/Field replaceable, hot swappable internal
batteries and battery packs/Attractive all-black UPS design.
Find the TrippLite UPS appropriate for your needs. Try the TrippLite UPS Sizing Guide Today.
Includes SMART3000RM2U UPS System, PowerAlert Software and cabling,
Mounting hardware, Warranty information and Instruction manual.
* 3000VA/2250 watt output power capacity compatible with North American
120V/60Hz power.
* 2U rack/tower UPS installs in standard 19 inch rack enclosures with an
installed depth of only 19 inches.
* Protects sensitive networking equipment from blackouts, voltage
fluctuations and transient surges.
* Line interactive Automatic Voltage Regulation (AVR) corrects inputs from
79~147VAC back to usable 120V levels without consuming battery power.
* Dual boost AVR circuits boost undervoltages by 14% or 24% depending on
the severity and reduces overvoltages by 12%.
* Network interfaces support simultaneous communications via 2 USB, 2 DB9
serial and SNMPWEBCARD slot.
* Included PowerAlert UPS monitoring software supports safe unattended
shutdown, monitoring and control via local connected servers, plus any
number of additional servers over IP.
* Communications ports support on-battery, low-battery, power-restored, AC-
voltage, DC-voltage, output current monitoring, battery charge current,
battery capacity, internal UPS temperature, AC line frequency, timed
inverter shutoff, activate self-test and load bank output power control.
* Built in Emergency Power Off (EPO) interface with cable.
* Sine wave output in AC and battery modes.
* Expandable runtime with optional battery packs -- BP48V24-2U (limit 1)
and BP48V60RT-3U (multi-pack compatible).
* Half load runtime of 13 minutes with internal batteries, Add 1 BP48V24-2U
for 45 minutes or 1 BP48V60RT-3U for 98 minutes (1500VA/1120 watts).
* Full load runtime of 4 minutes with standard internal batteries, Add 1
BP48V24-2U for 20 minutes (3000VA/2250 watts).
* Includes 9 output receptacles arranged in 3 load banks (4 NEMA 5-15R/
4 NEMA 5-15/20R/1 NEMA L5-20R).
* Ships with NEMA 5-20P input plug, user installable NEMA 5-30P replacement
plug included.
* Integrated 3 bank switched PDU enables remote outlet management for load
shedding or remote reboot of individual devices.
* 3 stage metered LEDs offer current monitoring and battery charge level.
* Mains power and voltage regulation LEDs offer at-a-glance power status
information.
* Front panel switches support self-test and alarm cancel functions.
* Included UPSRMRII adjustable mounting rails support installation in 19
inch racks with a front-to-rear depth of 23.5 and 36.5 inches (add a 2nd
UPSRMRII accessory to extend the reach to 35.25 to 49.5 inches).
* UPS ships fully assembled in full compliance with DOT regulations, no
time consuming connection of internal batteries by user required.
* Supports 2 post rackmount installation with optional 2POSTRMKIT
accessory.
* Supports upright tower placement with optional 2-9USTAND accessory.
* UL (USA), cUL (Canada), NOM (Mexico), FCC Class A (Emissions) listed.
* 2 year manufacturers product warranty, $250,000 Ultimate Lifetime
Insurance.
-- SPECIFICATIONs -------------------------------------
OUTPUT - Volt amp capacity : 3000 VA
Watt capacity : 2250 watts
Nominal Voltage : 120V
Voltage regulation : LINE MODE- Sine wave line voltage 120V
(-18%/+8%)
BATT.MODE- Sine wave output 120V +/-5%
Freq. regulation : LINE MODE- Passes line frequency of
60Hz +/-10%
BATT.MODE- Inverter output regulated to
60Hz +/-0.5Hz
Outlets : 9 outlets (4 NEMA 5-15R
4 NEMA 5-15/20R
1 NEMA L5-20)
Customized load
management : 3 individually controllable pairs of
outlets support automated load
shedding and remote reboot on demand
of locked network devices.
Configurable via PowerAlert software
to automatically switch off optional
loads, like monitors, to increase
available runtime for servers and
other critical devices.
Overload protection: Resettable circuit breaker
INPUT - Max. amps/watts : 24A
Connection type : NEMA L5-30P input plug (includes user
installable NEMA 5-20P replacement
plug).
Cord length : 10.0 ft., 10 guage
Rec. electrical
service : 30A, 120V
COMMUNICATIONS-
Network monitor port: Includes 4 built-in monitoring ports,
2-USB & 2-DB9. Each supports on
battery, low battery, power restored,
AC line voltage, DC battery voltage,
load percentage, battery charge
current, battery capacity, internal
UPS temperature and line frequency
status messaging. Interface supports
timed inverter shutoff after
unattended shutdown, activate self-
test and 10 second reboot of connected
equipment. Supports reboot of all
connected devices at once via software
interface. Compatible with Tripp
Lite's PowerAlert software.
Software and cabling
included: Includes PowerAlert UPS monitoring
software for all common network and
standalone operating systems. Ships
with 4 cables, 2-USB to USB & 2-DB9
to DB9.
SNMP compatibility : Built-in accessory slot accommodates
internal SNMPWEBCARD and other network
accessories.
WatchDog
compatibility: Yes, compatible with Tripp Lite's
WatchDog system service software to
restore operation to locked equipment
through soft reboot of application/OS
or hard power off/on reboot of
connected equipment - ideal for
unattended kiosk applications.
BATTERY - Full load runtime : 4 minutes (3000VA), 45 minutes with
1 BP48V60RT3U.
Half load runtime : 13 minutes (1500VA), 98 minutes with
1 BP48V60RT3U.
Expandable battery
runtime: Supports extended runtime with optional
external battery packs BP48V242U (limit
1) and BP48V60RT3U (multi-pack
compatible).
DC system voltage : 48V DC
Typical battery
lifespan: 3-6 years, depending on usage
Batt.recharge rate: 2-4 hours to 90%
Battery Access : Battery access door allows hot swap
battery replacement without powering
connected equipment off.
SURGE/NOISE SUPPRESSION-
AC surge suppression: 1800 joules
AC suppression
response time: Instantaneous
EMI/RFI AC noise
suppression: Yes
LINE/BATTERY TRANSFER-
Time from line power
to battery mode: 2~4 milliseconds
Low voltage transfer
to battery power: 79V (resets to line power as voltage
increases to 83V).
High voltage transfer
to battery power: 147V (resets to line power as voltage
decreases to 144V).
VOLTAGE REGULATION-
Voltage regulation : Automatic Voltage Regulation (AVR)
circuits maintain clean, regulated
computer-grade 120V nominal output,
without using battery power, during
brownouts to 79V and overvoltages to
147V.
Overvoltage
correction: Input voltages between 128 and 147VAC
are reduced by 12%.
Direct pass through : Input voltages between 105 and 127VAC
are passed on to connected equipment
unchanged.
Brownout correction : Input voltages between 95 and 104VAC
are boosted by 12%.
Severe brownout
correction: Input voltages between 79 and 94VAC
are boosted by 24%.
LEDS ALARMS & SWITCHES-
Front panel LEDs : 5 front panel LEDs - Green POWER LED,
Green VOLTAGE CORRECTION LED, 3 color
BATTERY CHARGE LED, 3 color OUTPUT
LOAD LED, red BATTERY WARNING LED.
Alarms : 3 function audible alarm indicates
power failure conditions (4 short
beeps every 10 seconds), overload
(continuous short beeps) and low
battery (continuous tone).
Switches : Yes, includes 2 front panel mounted
push-button switches for system
enable, self-test and alarm cancel
functions.
SPECIAL FEATURES-
EPO port : Includes RJ11 EPO (emergency power
off) port and interconnection cable.
TVSS grounding : Includes back panel grounding point
with thumbscrew for data line surge
suppressors and other network
accessories requiring a safe
grounding point.
Cold Start : Yes, inverter can be "cold started" to
enable temporary AC output during a
power failure.
Appearance : Attractive gray rackmount housing,
optional 2U black front bezel
included to enable black color
appearance.
Construction : Steel
Form factors
supported: Ships with all accessories required
for 2U rackmount installation in a
4 post rack enclosure, 2 post
rackmount supported with optional
2POSTRMKIT, supports tower
installation with optional 2-9USTAND.
Cooling method : Fan
ENVIRONMENTAL- Operating Temperature: +32 ~ +104 degrees Fahrenheit
0 ~ +40 degrees Celsius
Storage Temperature : +5 ~ +122 degrees Fahrenheit
-15 ~ +50 degrees Celsius
Relative Humidity : 0 to 95%, non-condensing
Line mode BTU/hr. : 285.4 BTU max.
APPROVALS - UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM
(Mexico).
SIZE - 17.5"w x 3.5"h x 19.0"d WT.- 64 lbs.
|
