MODEL- SMC-2586W-G        VENDOR- SMC NETWORKS                           
   
FEATURES- SMC2586WG-SMC - EliteConnect 2.4GHz 802.11g Wireless Bridge
       Designed to connect two or more separated Local Area Networks
        (usually located in different buildings), the SMC EliteConnect
        802.11g Wireless Bridge is the easiest alternative to a traditional
        wired network. It delivers high data rate, and allows personnel in
        a corporate campus environment to access all local and remote
        network resources. The new 802.11g Wireless Bridge is also a cost-
        effective solution. It eliminates the need for expensive cabling 
        and difficult-to-install leased lines.
       SMC2586W-G bridges two or more wired LANs. Connected to the Ethernet 
        backbone through an RJ-45 connector, the Wireless Bridge (Access 
        Point/Bridge and Bridge Master modes) can also function as an 
        Access Point, bridging between a wired LAN and one or more wireless 
        mobile PC-based stations. The EliteConnect 2.4GHz 802.11g Wireless 
        Bridge connects difficult-to-wire locations, branch offices, school 
        or corporate campus environments, frequently changing workplaces, 
        temporary LANs, hospitals and warehouses. The Wireless Bridge also 
        allows multiple buildings to share a single Internet connection.
       SMC2586W-G has three operational modes: Access Point/Bridge, Bridge 
        Master, and Bridge Slave. The Access Point/Bridge mode provides 
        both Access Point and Bridging functionalities. The Bridging 
        function is supported through Wireless Distribution System (WDS). 
        When SMC2582W-B and SMC2682W 802.11b 11 Mbps Wireless Bridges exist 
        in the same Bridging environment as the SMC2586W-G, Bridge Master 
        or Bridge Slave modes can be used.
       SMC2586W-G EliteConnect Wireless Bridge supports advanced wireless 
        security features including 64-bit or 128-bit key WEP wireless data 
        encryption, 802.1x, the new Wi-Fi Protected Access (WPA), disabled 
        SSID broadcast, wireless client isolation, and MAC address 
        filtering to block unauthorized wireless clients. In addition, the 
        EliteConnect 802.11g Wireless Bridge provides multiple levels of 
        protocol filtering (Ethernet, IP, TCP/UDP) to ensure network 
        security.
       The EliteConnect 2.4GHz 802.11g Wireless Bridge also has flexible 
        management features. Web-based network management tools make 
        configuration and remote management of the network simple. IT 
        professionals can also use Telnet or TFTP to quickly and easily 
        manage the device. In addition, SMC2582W-B supports SNMP allowing 
        easy integration of your wireless LAN with your wired 
        infrastructure. Other management features include a system log, 
        event log and syslog. Above all, SMC2586W-G 802.11g Wireless Bridge 
        comes with the EliteConnect Management Utility that eases the 
        Network Administrators  large-scale remote management problems. 
        EliteConnect Management Utility is simple and intuitive to use. Yet 
        the utility is a convenient and powerful tool for IT professionals 
        to remotely configure, manage, and upgrade firmware to all SMC 
        Wireless Bridges (SMC2586W-G, SMC2582W-B, SMC2682W). This reduces 
        the IT work burden and lowers the total cost of ownership.
       SMC2586W-G comes with a detachable antenna. If extended range is 
        required, users can choose among the wide selection of SMC 2.4GHz 
        High Gain Antennas. The EliteConnect Wireless Bridge also supports 
        Power over Ethernet that adheres to 802.3af standard (using 
        optional SMCPWR-INJ3). Power over Ethernet reduces installation 
        cost by using standard Category 5 cable to provide power to the 
        Wireless Bridge.
       Combining all of the above features with SMC s award winning 24/7 
        technical support, the SMC2586W-G EliteConnect 2.4GHz 802.11g 
        Wireless Bridge is the best available, fast, reliable, and cost-
        effective building-to-building solution in the market.
   
  -- SPECIFICATIONs ------------------------------------
STANDARDS    - 802.11b, 802.11g, 802.3, 802.3u, 802.3af, 802.3x
DATA RATE & MODULATION-
               OFDM @ 54Mbps, CCK @ 11/5.5Mbps, DQPSK @ 2Mbps and
                DBSK @ 1Mbps.
RADIO TECHNOLOGY-
               OFDM, DSSS
OPERATING RANGE-
               Up to 1,155 feet
CHANNELS     - USA   : 1-11 (FCC)
               Canada: 1-11 (IC)
               Europe: 1-13 (ETSI)         
               France: 10-13
               Japan : 1-13 (Japan)
FREQ. RANGE  - 2.402 ~ 2.472 GHz (North America)
               2.402 ~ 2.4970 GHz (Japan)
               2.402 ~ 2.4835 GHz (Europe ETSI)
               2.4465 ~ 2.4835 GHz (France)
TRANSMISSION OUTPUT POWER-
               18 dBm max
RECEIVING SENSITIVITY-
               < -80 dBm, Typical
ANTENNA      - Removable Antenna with R-SMA connector
OPERATION MODES-
               Access Point/Bridge (used in pure SMC2586W-G bridging 
                 environment).
               Bridge Master (used when SMC2586W-G, SMC2582W-B, and 
                 SMC2682W are in the Bridging environment).
               Bridge Slave (used when SMC2586W-G, SMC2582W-B, and SMC2682W 
                 are in the Bridging environment).
INTERFACE    - 10/100 Mbps RJ-45 Connector
               RS-232c Serial Connector
               802.11b/g WLAN
SECURITY     - 64/128-bit WEP
               802.1x
               WPA
               MAC address filtering
               Disabled SSID broadcast
               Wireless client isolation
CONFIGURATION & MANAGEMENT-
               Web-browser
               Telnet
               TFTP
               SNMP
               Syslog
               Event Logging
INDICATORS   - LEDs for Power, LAN, WLAN, Alive
APPROVALS    - FCC B, CE, ETS 300.328; ETS 300 826
POWER- 100 VAC, 60Hz; 12 VDC, 1A
SIZE - 8.5" x 5.5" x 1.25" w/o antenna          WT.- 0.96 lbs.