|
| |
 |
|
|
| MODEL-
WAP4400N-Linksys-Wireless-N Access Point with Power Over Ethernet- LINKSYS FEATURES-
Wireless-N Access Point with Power Over Ethernet High-Speed Wireless Access for Existing
Networks! With the growth in high bandwidth applications, such as storage and video in the
work place, network performance is essential. Wireless technology is no longer lagging
behind wired performance. The introduction of the Linksys Business Series WAP4400N
wireless Access Point answers the growing business' need for access, speed and security.
The Access Point uses the very latest wireless networking technology, Wireless-N (draft
802.11n). By overlaying the signals of multiple radios, Wireless-N's "Multiple In,
Multiple Out" (MIMO) technology multiplies the effective data rate. Unlike ordinary
wireless networking technologies that are confused by signal reflections, MIMO actually
uses these reflections to increase the range and reduce "dead spots" in the
wireless coverage area. The Linksys Wireless-N Access Point lets you connect Wireless-N
(802.11n), Wireless-G (802.11g) or Wireless-B (802.11b) devices to your wired network so
you can add PCs to the network with no cabling hassle. Power over Ethernet support makes
it easy to install -- you can mount the Access Point anywhere, even without ready access
to a power plug. With appropriate Power Over Ethernet support at the other end, you only
need to run one cable to the Access Point to deliver both data and power. Of course, you
can also use the included AC adapter if your installation point has power available
nearby. Moreover, the integrated QoS features provide consistent voice and video quality
on both the wired and wireless networks, enabling the deployment of business qualilty VoIP
and video applications. To protect your data and privacy, the Linksys Wireless-N Access
Point supports both Wired Equivalent Privacy (WEP) and the industrial-strength wireless
security of Wi-Fi Protected Access (WPA), encoding all your wireless transmissions with
powerful encryption. The MAC Address filter lets you decide exactly who has access to your
wireless network, and advanced logging keeps you appraised. Configuration is a snap with
the web browser-based configuration utility. The Linksys Wireless-N Access Point with
Power Over Ethernet is the best way to add wireless access to your existing business
network. Includes Wireless-N Access Point with PoE, User Guide on CD-ROM, Ethernet Network
Cable, Power Adapter, Product Stands, Registration Card. * Complies with IEEE draft
802.11n standards while at the same time being backwards compatible with 802.11b and g
devices. * Standards-based POE (IEEE 802.3af) or External DC power * MIMO technology uses
multiple radios to create a robust signal that travels farther and reduces dead spots. *
Support for WMM provides improved QoS over wireless connections for better video and voice
performance. -- SPECIFICATIONs ------------------------------------ STANDARDS - Draft
IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3, IEEE802.3u, IEEE802.3af (Power over
Ethernet), 802.1x (Security Authentication), 802.11i - Ready (Security WPA2), 802.11e -
Ready (Wireless QoS). CONNECTORS - (1) 10BaseT/100BaseTX/RJ45 port BUTTONS - Reset CABLE
TYPE - UTP CAT 5 INDICATORS - LEDs for Power, Ethernet, Wireless, POE O/S SUPPORT - Linux
SETUP/CONFIG - WebUI : Built in Web UI for easy browser-based configuration (HTTP/HTTPS).
MANAGEMENT - SNMP Version : SNMP Version 1, 2c, 3 Event Logging : Remote Syslog Web
Firmware : upgradeable through web-browser Diagnostics : Flash, RAM, LAN, WLAN DHCP : DHCP
Client OPERATE MODES - Access Point : Access Point Mode WIRELESS - Spec/Modulation: Radio
and Modulation Type: 802.11b/DSSS, 11g/OFDM, 11n/OFDM Channels : 11 North America 13 Most
of Europe (ETSI and Japan) Internal Ant. : None External Ant. : 3 (Omni-Directional)
Transmit Power : Transmit Power (Adjustable) at Normal Temp Range: 11b - 16 dBm at 1TX 19
dBm at 2TX 11g - 13 dBm at 1TX 16 dBm at 2TX 11n - 13 dBm at 1TX 16 dBm at 2TX Antenna
Gain : 2 dBi Receiver Sensitivity: 11.n: 300Mbps at -69dbM 11.g: 54Mbps at -73dBm 11.b:
11Mbps at -88dBM SECURITY - WEP/WPA/WPA2 : WEP 64bit/128bit, WPA-PSK, WPA2-PSK, WPA-ENT,
WPA2-ENT. Access Control : Wireless connection control: MAC-based SSID Broadcast : SSID
Broadcast enable/disable 802.1X : IEEE 802.1X support QUALITY OF SERVICE- QoS : 4 queues
WMM Wireless priority MISCELLANEOUS - Load Balancing New AP detection (used with WPC4400N)
New client detection (used with WPC4400N) Auto-channel selection APPROVALS - FCC, CE, IC
POWER SOURCE - 12V 1A DC input, and IEEE802.3af Compliant PoE DIMENSIONS - 7.8"w x
5.16"h x 7.8" |
| We diligently strive to provide as accurate information as
possible. However, as manufacturers provide a large proportion of this information, we
make no warranty expressed or implied with respect to accuracy of the information,
including price, product descriptions or product specifications. Both the product and
manufacturer names are used only for the purpose of identification.
Copyright© 2008 JMAC ELECTRONICS
|
| |
|
