MODEL- WAP54GP            VENDOR- LINKSYS
    
FEATURES- WAP54GP-Linksys-Wireless-G Access Point with Power Over Ethernet
       The Linksys Wireless-G Access Point lets you connect Wireless-G 
        (802.11g) or Wireless-B (802.11b) devices to your wired network so 
        you can add PCs to the network with no cabling hassle. Power over 
        Ethernet support makes it easy to install -- you can mount the 
        Access Point anywhere, even without ready access to a power plug. 
        With appropriate Power Over Ethernet support at the other end, you 
        only need to run one cable to the Access Point to deliver both data 
        and power. 
       It is also perfect for use as a bridge, a kind of "cable-less 
        cable" to connect remote areas together. Maybe Shipping is all the 
        way across the warehouse from Receiving. Or maybe you want to set 
        up a home office in your detached garage. With one Wireless-G 
        Access Point in each end, you are connected at 54Mbps -- with no 
        cable to run. 
       To protect your data and privacy, the Wireless-G Exterior Access 
        Point supports both Wired Equivalent Privacy (WEP) and the 
        industrial-strength wireless security of Wi-Fi Protected Access
        (WPA), encoding all your wireless transmissions with powerful 
        encryption. The MAC Address filter lets you decide exactly who has 
        access to your wireless network, and advanced logging and emailed 
        intrusion alerts keep you appraised. You can create multiple SSIDs 
        that connect to individual VLANs to keep your traffic separated. 
        Configuration is a snap with the web browser-based configuration 
        utility. 
       The Linksys Wireless-G Access Point with Power Over Ethernet is the 
        best way to add wireless access to your existing business network. 
    Includes Wireless-G Access Point with POE, User Guide on CD-ROM,
      Network Cable, Power Adapter, Adapter Stands, Registration Card.
* 802.11g supports data rates up to 54Mbps
* Backwards compatible with existing 802.11b devices
* Supports multiple SSID with VLAN to create separate, secured networks.
* Supports Power over Ethernet (PoE)
* Supports SNMP management
     
  -- SPECIFICATIONs ------------------------------------
STANDARDS    - IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u,
                 IEEE802.3af (Power Over Ethernet), IEEE 802.1p (QoS 
                 Priority), IEEE 802.1q (VLAN), 802.1x (Security 
                 Authentication), 802.11i - Ready (Security WPA2), 802.11e 
                 - Ready (Wireless QoS).
CONNECTORS   - (1) 10BaseT/100BaseTX/RJ45 port
               (1) Antenna Connector Type RSMA
BUTTONS      - Reset
CABLE TYPE   - Category 5 (or better) 
INDICATORS   - LEDs for Power, Ethernet, Wireless-G
SETUP/CONFIGURATION-
               Built-in Web UI for Easy Browser-based Configuration 
                 (HTTP/HTTPS).
MANAGEMENT   - SNMP Version 1, 2c
               Event Logging
               Firmware Upgradeable through Web Browser
INDICATORS   - LEDs for Flash, RAM, LAN, WLAN
OPERATING MODES-
               Access Point Mode
               Point-to-Point (Bridge)
               Point-to-MultiPoint (Bridge)
               Repeater
WIRELES      - Radio and Modulation Type: 802.11b/DSSS, 11g/OFDM
               Data Rates Supported 11b: 1, 2, 5.5, 11 Mbps
                                    11g: 6, 9, 11, 12, 18, 24, 36, 48, 54 
                                           Mbps
               Operating Channels      : 11 North America
                                         13 Most of Europe (ETSI and Japan)
               # of External Antenna   : 1 (Omni-Directional)
               Transmit Power (Adjustable) @ Normal Temp Range:
                                         11g: Typical - 14dBm
                                         11b: Typical - 18dBm
               Receiver Sensitivity 11g: 54Mbps@ -69dBm
                                    11b: 11Mbps@ -82dBM
SECURITY     - WEP 64-bit/128-bit, WPA-TKIP/AES, WPA-PSK, WPA-ENT
               802.1x - RADIUS (MD5, SHA1, TLS, TTLS, PEAP) Dynamically 
                 Varying Encryption Keys.
               Access Control List (ACL) Capability: MAC-Based
               SSID Broadcast Enable/Disable
               Supports Multiple SSIDs
               Supports SSID to 802.1q VLAN Mapping with Wireless Client 
                 Isolation.
REQUIREMENTS - 802.11b or 802.11g Wireless Adapter with TCP/IP Protocol 
                 Installed per PC.
               Network Adapter with Ethernet Network Cable and TCP/IP 
                 Protocol Installed per PC.
               Switch/Router with Power Over Ethernet (PoE) Support or PoE 
                 Injector.
               Web-Based Configuration Java-Enabled Web Browser.
APPROVALS    - FCC, CE
POWER- 12V 1A, IEEE 802.3af Compliant PoE
SIZE - 1.26"w x 7.83"h x 6.89"d