MODEL- WG302NA VENDOR- NETGEAR INC.
FEATURES- WG302NA-Netgear-ProSafe 802.11g Wireless Access Point
Intelligent Networking Features for a Scalable, Secure Solution.
NETGEAR's ProSafe 802.11g Wireless Access Point sets the standard
for next-generation high performance, secure, manageable, reliable
wireless local area networks (WLANs). This powerful device provides
the ultimate in continuous industry-standard 54 Mbps access to
corporate network resources, e-mail, and the Internet for a
wireless workforce.
Fully compatible with IEEE 802.11g (2.4 GHz), it also can be set for
dynamic 108 Mbps 802.11g.** In addition, it is backward compatible
to preserve your 802.11b-based investments, providing a migration
path to higher performance networking. Wireless Distribution System
(WDS) supplies wireless point-to-point bridging, point-to-
multipoint bridging, and repeater functionality for deployment over
large areas.
Advanced security features include up to 152-bit Wireless Encryption
Protocol (WEP) data encryption, Wi-Fi Protected Access (WPA)***,
802.1x and Virtual Private Network (VPN) pass-through support, and
Medium Access Control (MAC) address filtering. NETGEAR ProSafe
Wireless Access Point is rated for plenum air spaces.
** Static 108 Mbps 802.11g available now. Dynamic version available
via future firmware update. In order to achieve 108 Mbps,
requires client adapter that supports the same mode. NETGEAR's
WAG311 PCI Card, WAG511 PC Card and WG511T PC Card all support
108 Mbps 802.
*** Future firmware upgrade.
Includes Wireless Access Point, Two (2) 5 dBi Detachable Antennas,
Resource CD, Power adapter, 3 m (10-ft) Ethernet cable, Wall Mounting
Kit, Installation guide, Warranty/support information card.
* Security
Complies with industry security standards for wireless data encryption,
user authentication, and user authorization. Delivers state-of-the-art
WLAN security with 40/64-, 128-, and 152-bit WEP data encryption. WPA***
provides enhanced, interoperable Wi-Fi IEEE 802.11b wireless networking
security. Includes MAC address authentication with 256-user Access
Control List (ACL) and VPN pass-through. WPA and 802.1x support enables
strong mutual authentication to ensure that only legitimate clients
associate with corporate RADIUS servers.
* Management
Integrated IEEE 802.3af-based Power over Ethernet (PoE) support
eliminates extra cables and the need to locate near a power outlet, as
the access point is powered over the Ethernet cable. Supports Simple
Network Management Protocol (SNMP) MIB I, MIB II, and 802.11 MIB using
SNMP-based network management software, such as HP OpenView. Supports
all popular 802.1x port-based authentication protocols, including
Extensible Authentication Protocol (EAP) Transport Layer Security (TLS),
Protected EAP (PEAP), and Tunneled TLS (TTLS). Console port facilitates
local configuration and monitoring. Users can remotely configure,
update, and monitor multiple WG302's simultaneously via FTP.
* Aptitude
IEEE 802.11g wireless standard -- with optional speeds up to 108 Mbps**
-- takes care of business communications with great dispatch and skill.
Delivers Wireless Distribution System (WDS) functionality for point-to-
point and point-to-multi-point bridging and repeater modes. A fourth
mode enables the WG302 to act as a bridge and access point
simultaneously. Dynamic rate shifting guarantees the fastest possible
connections. Auto Network Connect keeps users connected to the network
even while roaming.
* Usability
Cost effective, simple to install and use. Plenum rated - appropriate
for placement above drop-down ceilings and under raised floors. Equipped
with convenient Smart Wizard browser-based interface. Fitted with two
external, detachable 5 dBi antennas -- obtain NETGEAR's antenna and
flexible point placement accessories separately for expanded wireless
capacity and range. IEEE 802.11e-based Quality of Service (QoS) support
is available via firmware upgrade. Protected with a NETGEAR 3-year
warranty.
-- SPECIFICATIONs ---------------------------------------
WIRELESS - IEEE 802.11g 54 Mbps Wireless Access Point
Two (2) 5 dBi detachable antennas
Typical maximum power output: 19.8 dBm
Typical maximum receive sensitivity: 96 dB
CONNECTORs- (1) 10BaseT/100BaseTX/RJ-45 port with Auto Uplink (Auto MDIX)
with IEEE 802.3af Power over Ethernet (PoE) support.
(1) console port with standard RS-179.00C interface with DB-9 male
connector.
(2) reverse SMA antenna connectors
PROCESSOR - Intel 422
MEMORY - 8MB Flash, 16MB DRAM
INDICATORs- LEDs: Power, Test, 100 Mbps, Link/ACT, and WLAN 802.11g
NETWORK MANAGEMENT-
Remote configuration and management through Web browser, SNMP
or Telnet with command line interface (CLI).
SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB
ADVANCED WIRELESS FEATURES-
Wireless Distribution System
Point-to-point wireless bridge mode
Point-to-multipoint wireless bridge mode
Repeater mode
Simultaneous wireless bridge and access point mode
Adjustable output power control from 100 mW down to 0 mW
SECURITY - 40/64-, 128-, and 152-bit WEP encryption
Block SSID Broadcast
VPN pass-through support
MAC address filtering with access control lists -- up to 256
users.
802.1x RADIUS support with EAP TLS, TTLS, PEAP
Wi-Fi Protected Access (WPA)***
Secure SSH Telnet
Secure Socket Layer (SSL) remote management login (Free basic
installation support provided for 90 days from date of
purchase; optional premium support available).
Wireless isolation enables peer-to-peer blocking so users may
not access another user s PC.
REQUIRES -
Configuring the Access Point: Windows 98, Me, 2000, or XP
2 Mbytes of available disk space
APPROVALS - IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation
Technique)
IEEE 802.3af Power over Ethernet (PoE)
FCC Part 15 Subpart B and Subpart C
CE EN60950, EN 300328-2 v1.1.1 (2000-07), EMC EN301489-1 v1.2.1
(2000-08), and EN301489-17 v1.1.1 (2000-09).
EN55022(B), CISPR22(B), AS/NZS 3548(B)
POWER- Power adapter: Output 12 VDC, 1.2A
SIZE - 7.4"w x 4.8" x 1.25" WT.- 1.27 lbs.
|
